BY-SHED-LC2NEUTRIK allows you to use ordinary Single-mode or Multimode optical Fiber over 500 Meters (MMF)/10 Kilometers (SMF). then at the near place of Camera, you can use our this device and Short opticalCON DUO Hybride optical cable to connect between CCU base and Camera back fiber link in your venue/facility infrastructure because you are allowed to directly connect BY-SHED-LC2NEUTRIK with the universal AC 115-230 V power , so that this short opticalCON DUO Hybride optical cable has its output power DC 76 V for Camera Back Fiber link. so you can avoid the length limit of opticalCON DUO Hybride Cable when you need the long distance transmission over Fiber. for more, you can see the last image.
Notice: does not support BMD devices, if you want to work with BMD devices, please dont order it
SPECS
ELECTRO-OPTICAL
Fiber type: Single-mode
Type: optically passive
Dimensions(W x H x D): 188 x 254 x 45 mm
Weight: 0.5Kg
Connector:
(A) Electrical: IEEE 3-pin
(B) Optical: NEUTRIK opticalCON DUO (for more, please check the below specs)
(C) Cnlinko LP24 Dual LC/FC/SC/ST (for more, please check the below related specs)
Voltage: 115-230 VAC
Output max load: 200 VA
Max Output Voltage: 76 V
Power consumption: <20 W
Temperature range: -20 to 55 °C
Humidity range: 0 to 95 % non-condensing
Package:
Only 1 piece as the main image
Supplements:
(1）NEUTRIK opticalCON DUO connector
The Neutrik OpticalCON series female chassis connector with black chromium plating has 4 solder contacts, 2 single-mode LC-Duplex feedthrough socket and 1 shell ground contact. It acts as a "feed-through" allowing simplified installations by connecting a conventional LC-Duplex on the rear. It is built in the standard D size shell and features an automatic sealing cover for maximum dust and dirt protection and a Push-Pull locking mechanism for safe connection. Insertion loss of <0.5 dB
(2）The Cnlinko LP24 Dual LC is a fiber optic surface mount socket signal connector. Accommodates 26-24 AWG cable. It locks into the corresponding fiber optic plug.
- Dual channel system
- Quick and easy operation
- Rated for moisture and dust protection
- Comes with waterproof cap
Dimensions (without cap)- 35.7 mm Height x 33 mm Width x 29.5 mm Depth (1.4" x 1.3" x 1.16")
Number of Contacts- 2
Wire Gauge- 26-24 AWG
Diameter Range- 5.5-7mm
Insulation Resistance- > 500MOhm
Ingress Protection- IP65/67
Durability- > 500 times
Operating Temperature- -40 C to 80 C (-40 F to 176 F)
Housing Material- Zinc Alloy
Flammability Rating- UL94-V0